Stainless steel agitator tank 50-4000L

New stainless steel vessel
Type: CILC50
Volume: 57L
Type: Standing on feet
Single jacket
Surface: Inside IIId, outside scotch brite
Weldings inside: Pickled, passivated and brushed
Operating pressure: ATM
Top: Open with reinforced edge
Bottom: Cone 15° with tube to the front

New stainless steel mixing tank with propeller mixer
Type: CILC50RWP
Volume: 57L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC50RWD
Volume: 57L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank with gear agitator
Type: CILC50RWS
Volume: 57L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°
 

New stainless steel mixing tank with cup stirrer agitator
Type: CILC50RWB
Volume: 57L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank with anchor agitator
Type: CILC50RWA
Volume: 57L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°
 

New heat/-coolable stainless steel vessel with thermoplate
Type: CILC50TPA4
Volume: 57L
Type: Standing on feet
Wall thickness: At least 2mm
Material: AISI316L stainless steel
Surface: Inside IIId, outside SBR
Weldings inside: Grinded
Operating pressure: ATM
Max. operating pressure thermoplate: +1,8Bar
Top: Open with reinforced edge
Bottom: Cone with centric outlet and tube to the front DN25

New heat/-coolable stainless steel vessel with thermoplate and propeller mixer
Type: CILC50TPRWPA4
Volume: 57L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New heat/-coolable stainless steel vessel with thermoplate and dissolver
Type: CILC50TPRWDA4
Volume: 57L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New heat/-coolable stainless steel vessel with thermoplate and gear agitator
Type: CILC50TPRWSA4
Volume: 57L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New heat/-coolable stainless steel vessel with thermoplate and cup stirrer agitator
Type: CILC50TPRWBA4
Volume: 57L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°

New heat/-coolable stainless steel vessel with thermoplate and anchor agitator
Type: CILC50TPRWAA4
Volume: 57L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°
 

New  stainless steel vessel with thermoplate and insulation
Type: CILC50TPISOA4
Volume: 57L
Type: Standing on three feet
Thermoplate and insulation
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: Open with dust cover lid
Bottom: Cone bottom aprox. 15°

New  heat-/coolable stainless steel mixing tank with insulation
Type: CILC50TPISORWPA4
Volume: 57L
Type: Standing on three feet
Thermoplate
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: 1/2 folding lid
Bottom: Cone bottom aprox. 15°
 

New heat-/coolable stainless steel mixing tank with insulation
Type: CILC50TPISORWDA4
Volume: 57L
Type: Standing on three feet
Wall thickness 2mm + Thermoplate
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: Open with dust cover lid
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank with insulation
Type: CILC50TPISORWSA4
Volume: 57L
Type: Standing on three feet
Thermoplate
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: 1/2 folding lid
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank with insulation and cup stirrer
Type: CILC50TPISORWBA4
Volume: 57L
Type: Standing on three feet
Thermoplate
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: Centric travers with 2pc folding lids
Bottom: Cone bottom aprox. 15°

New  heat-/coolable stainless steel mixing tank with insulation
Type: CILC50TPISORWAA4
Volume: 57L
Type: Standing on three feet
Thermoplate
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Grinded
Operating pressure tank: ATM
Operating pressure thermoplate: 1,8Bar
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°

New stainless steel vessel
Type: CILC80
Volume: 87L
Type: Standing on feet
Single jacket
Surface: Inside IIId, outside scotch brite
Weldings inside: Pickled, passivated and brushed
Operating pressure: ATM
Top: Open with reinforced edge
Bottom: Cone 15° with tube to the front

New stainless steel mixing tank
Type: CILC80RWP
Volume: 87L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC80RWD
Volume: 87L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC80RWS
Volume: 87L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC80RWB
Volume: 87L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Centric travers with 2pc folding lids
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC80RWA
Volume: 87L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Inside pickled, passivated and brushed
Operating pressure tank: ATM
Top: Centric travers with 2pc folding lids
Bottom: Cone bottom aprox. 15°

New stainless steel tank
Type: CILC100B
Volume: 109L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside BA
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Open with reinforced edge
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank
Type: CILC100BRWP
Volume: 109L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside BA
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°
 

New stainless steel mixing tank
Type: CILC100BRWD
Volume: 109L
Type: Standing on three feet
Single-wall
Material in contact with product: AISI304 stainless steel
Surface: Outside satinated, inside BA
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°
 

New stainless steel mixing tank
Type: CILC100BRWS
Volume: 109L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside BA (IIId)
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank wit cup stirrer agitator
Type: CILC100BRWB
Volume: 109L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside BA (IIId)
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Centric travers with 2 folding lids
Bottom: Cone bottom aprox. 15°

New stainless steel mixing tank with anchor agitator
Type: CILC100BRWA
Volume: 109L
Type: Standing on three feet
Single-wall
Surface: Outside satinated, inside BA (IIId)
Weldings: Inside pickled, passivated and brushed, outside satinated
Operating pressure tank: ATM
Top: Centric travers with 2 folding lids
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank
Type: CILC100BTPA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Open with reinforced edge
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank
Type: CILC100BTPRWPA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°
 

New heat-/coolable stainless steel mixing tank
Type: CILC100BTPRWDA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank
Type: CILC100BTPRWSA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: 1.4404 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank
Type: CILC100BTPRWBA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Centric travers with 2pc hinge lid
Bottom: Cone bottom aprox. 15°

New heat-/coolable stainless steel mixing tank with anchor agitator
Type: CILC100BTPRWAA4
Volume: 109L
Type: Standing on three feet
Single-wall with thermoplate
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Centric travers with 2pc folding lids
Bottom: Cone bottom aprox. 15°

New insulated heat-/coolable stainless steel tank
Type: CILC100BTPISOA4
Volume: 109L
Type: Standing on three feet
With thermoplate und insulation
Material in contact with product: AISI316 stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Open with reinforced edge
Bottom: Cone bottom aprox. 15°

New  heat-/coolable stainless steel mixing tank with insulation
Type: CILC100BTPISORWPA4
Volume: 109L
Type: Standing on three feet
With thermoplate and insulation
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°

New  heat-/coolable stainless steel mixing tank with insulation
Type: CILC100BTPISORWDA4
Volume: 109L
Type: Standing on three feet
With thermoplate and insulation
Material in contact with product: AISI316L stainless steel
Surface: Outside satinated, inside IIId
Weldings: Flat grinded
Operating pressure tank: ATM
Opeerating pressure thermoplate: Max. +1,8Bar
Top: Hinge lid, 1/2 can be opened, 1/2 fixed
Bottom: Cone bottom aprox. 15°