Pneumatic Container Mixer for 600-Liter IBC

Article number: IBC-0120-600L

The IBC pneumatic high-speed mixer for 600-liter containers is the ideal solution for turbulent mixing of low-viscosity media in industrial applications. The powerful IBC container mixer impresses with its robust stainless steel construction, high mixing performance and maximum operational safety.

With a motor power of 0.67 kW and a speed of up to 3000 rpm, the mixer delivers consistent and reproducible mixing results. It is suitable for liquids with a viscosity of up to 600 mPas and a density of up to 1.2 kg/l.

The precisely balanced stainless steel 1.4404 agitator shaft ensures smooth and stable operation and is equipped with a shaft coupling. At the end of the shaft is a highly polished, one-piece 3-blade mixing propeller (Ø 138 mm), which ensures short mixing times and efficient flow within the IBC.

For safe handling and easy transportation, the high-speed mixer is equipped with a stainless steel forklift traverse made of material 1.4301. It features two forklift openings, two galvanized tension hooks for securing the mixer to the IBC, and side carrying handles.

Pneumatic High-Speed Mixer for Liquid Media up to 600 mPas

Type: SRTPN0-67
Power: 0.67 kW
Speed: 600–3000 rpm
Operating pressure: 6 bar

Technical Features

The minimum motor speed required for smooth and stable operation is 600 min⁻¹. This results in a control range of approximately 5:1, depending on the specific application.

Oil-free operation is possible up to a maximum of 1500 min⁻¹. This requires dry and finely filtered compressed air.

Product-contacting material: Stainless steel 1.4404

The pneumatic high-speed mixer features a solid, removable agitator shaft with a sleeve coupling. The agitator shaft is balanced to ensure smooth and stable operation throughout the specified speed range.

Maximum shaft length: 900 mm

The drive is powered by a pneumatic motor with a shut-off valve for regulating the compressed air supply. Air consumption is approximately 3600 liters per minute at 6 bar.

The pneumatic high-speed mixer is designed for intermittent operation. Continuous operation is only possible with dehumidified and cooled air supply.

Agitator and Mixing Propeller

Agitator: 3-blade mixing propeller with a diameter of 125 mm, screwed onto the end of the agitator shaft.

The mixing propeller is made of cast stainless steel and is highly polished.

Flange Dimensions

Outer diameter A: 160 mm
Pitch circle diameter PCD: 130 mm
Holes: 4 × 9.5 mm
Centering diameter Z: 110 mm

Technical Data of the SRTPN0-67 Pneumatic High-Speed Mixer