Main page » IBC agitators » IBC mixer container agitators » Pneumatics container agitator type IBC-0130 suitable for liquids with up to 600 mPas
Pneumatics container agitator type IBC-0130 suitable for liquids with up to 600 mPas
IBC pneumatic high-speed mixer container agitator for 1000L IBC
Item number: IBC-0130
For liquids up to 600 mPas and a density of up to 1.2 kg/l in an 1000L IBC
Power: 0,67 kW
Speed: 400-3000 rpm
Operating pressure: 6 Bar
Material in contact with product: 1.4404 stainless steel (AISI316L)
Drive through compressed air motor
Air consumption 3600 litres per minute at 6 bar
Minimum motor speed for uniform concentricity 600 min-1
This means a control range of approx. 5:1, depending on the application.
Oil-free operation up to a maximum of 1500 min-1 possible, requires dry, finely
oil-free operation requires dry, finely filtered air.
Solid agitator shaft attached to the motor, removable through sleeve coupling, balanced for concentricity in the speed range
1 piece 3-blade mixing propeller Ø=125mm screwed in at the end of the agitator shaft
Mixing propeller made of cast stainless steel, mirror finish polished
For intermittent operation, continuous operation only with dehumidified and cooled air supply
Motor with shut-off valve to control the compressed air supply
Stainless steel traverse 1.4301 (AISI304)
with 2 tension hooks and 2 handles
Item number: IBC-0130
For liquids up to 600 mPas and a density of up to 1.2 kg/l in an 1000L IBC
Power: 0,67 kW
Speed: 400-3000 rpm
Operating pressure: 6 Bar
Material in contact with product: 1.4404 stainless steel (AISI316L)
Drive through compressed air motor
Air consumption 3600 litres per minute at 6 bar
Minimum motor speed for uniform concentricity 600 min-1
This means a control range of approx. 5:1, depending on the application.
Oil-free operation up to a maximum of 1500 min-1 possible, requires dry, finely
oil-free operation requires dry, finely filtered air.
Solid agitator shaft attached to the motor, removable through sleeve coupling, balanced for concentricity in the speed range
1 piece 3-blade mixing propeller Ø=125mm screwed in at the end of the agitator shaft
Mixing propeller made of cast stainless steel, mirror finish polished
For intermittent operation, continuous operation only with dehumidified and cooled air supply
Motor with shut-off valve to control the compressed air supply
Stainless steel traverse 1.4301 (AISI304)
with 2 tension hooks and 2 handles