Main page » Frequency inverter IP66 » External frequency converter Optidrive E3 1,5 KW 400 V IP 66

External frequency converter Optidrive E3 1,5 KW 400 V IP 66

Description

External frequency converter Optidrive E3 1,5 KW 400 V IP 66
Input voltage 3 x 400 V | Output voltage 3 x 400 V
No control cabinet required. Waterproof housing.

Infinitely variable speed control for three-phase motors up to 11.0 KW drive power.
Protection class IP66 | waterproof housing with switch and potentiometer for speed adjustment.
    Precise, digital control by pressing only one button.  Simple commissioning.
    Basic setting with 14 parameters. Standard settings, suitable for most applications.
    Contactor connection for easy connection
    Integral RFI Filter
    Built-in and external filter options for full EMC compliance
    Modbus RTU
    Easy integration into your control & monitoring systems
    Compact housing
    PTC thermistor short-circuit
    EMC filters
    Brake chopper (Sizes 2 & 3 only)
    Dynamic & compact options with a resistor mounted on the cooler
    High overload capacity
    150% overload for 60 seconds
    175% overload for 2 seconds
    Output frequency 0-500 Hz | PID control |
Mounting dimensions see size 3

This product is similar to:

SRT1-1-1000 High-speed mixer / Propeller...

High-speed mixer / Propeller agitator
Type: SRT1-1-1000
Power: 1,1 KW
Speed: 1000 rpm
Voltage: 3PH 400V 50/60 Hz
Motor with 3 thermistors (PTC)
Material in contact with product: 1.4404 stainless steel (AISI316L)
Maximum liquid temperature: 60°C
High-speed mixer with solid, non-removable agitator shaft.
Maximum shaft length: 1600mm
Agitator shaft balanced for concentricity in the rotational speed range.
1 piece 3-blade mixing propeller Ø=175mm screwed in at the end of the agitator shaft.
Mixing propeller made of a stainless steel casting, mirror finish polished.
Flange dimensions: AØ=200mm/LKØ=165mm(4xØ=11,5mm)/ZØ=130mm

Protection flange stainless steel:
Flange cover for motor with 10mm stainless steel flange (AISI304)
Stainless steel protective swing flange:
10mm stainless steel flange mounting flange. Motor on 4 rubber buffers. Therefore suitable for passage operation. (Filling/Draining while the agitator is in operation).
Reduces critical speed ranges during inverter operation.
Protection flange PP:
Motor flange cover with 20mm polypropylene flange.

from 669,00 EUR

SRT1-1-1500 High-speed mixer / Propeller...

High-speed mixer / Propeller agitator
Type: SRT1-1-1500
Power: 1,1 kW
Speed: 1500 rpm
Voltage: 3PH 400V 50/60 Hz
Motor with 3 thermistors (PTC)
Material in contact with product: 1.4404 stainless steel (AISI316L)
Maximum liquid temperature: 60°C
High-speed mixer with solid, non-removable agitator shaft.
Maximum shaft length: 1600mm
Agitator shaft balanced for concentricity in the rotational speed range.
1 piece 3-blade mixing propeller Ø=175mm screwed in at the end of the agitator shaft.
Mixing propeller made of a stainless steel casting, mirror finish polished.
Flange dimensions: AØ=200mm/LKØ=165mm(4xØ=11mm)/ZØ=130mm

Protection flange stainless steel:
Flange cover for motor with 10mm stainless steel flange (AISI304)
Stainless steel protective swing flange:
10mm stainless steel flange (mounting flange). Motor on 4 rubber buffers. Therefore suitable for passage operation. (Filling/Draining while the agitator is in operation).
Reduces critical speed ranges during inverter operation.
Protection flange PP:
Motor flange cover with 20mm polypropylene flange.

from 624,00 EUR

SRT1-5-1000 High-speed mixer / Propeller...

High-speed mixer / Propeller agitator
Type: SRT1-5-1000
Power: 1,5 KW
Speed: 1000 rpm
Voltage: 3PH 400V 50/60 Hz
Motor with 3 thermistors (PTC)
Material in contact with product: 1.4404 stainless steel (AISI316L)
Maximum liquid temperature: 60°C
High-speed mixer with solid, non-removable agitator shaft.
Maximum shaft length: 1600mm
Agitator shaft balanced for concentricity in the rotational speed range.
1 piece 3-blade mixing propeller Ø=200mm screwed in at the end of the agitator shaft.
Mixing propeller made of a stainless steel casting, mirror finish polished.
Flange dimensions: AØ=250mm/LKØ=215mm(4xØ=14mm)/ZØ=180mm

Protection flange stainless steel:
Flange cover for motor with 10mm stainless steel flange (AISI304)
Stainless steel protective swing flange:
10mm stainless steel flange mounting flange. Motor on 4 rubber buffers. Therefore suitable for passage operation. (Filling/Draining while the agitator is in operation).
Reduces critical speed ranges during inverter operation.
Protection flange PP:
Motor flange cover with 20mm polypropylene flange.

from 918,00 EUR

SRT1-5-1500 High-speed mixer / Propeller...

High-speed mixer / Propeller agitator
Type: SRT1-5-1500
Power: 1,5 kW
Speed: 1500 rpm
Voltage: 3PH 400V 50/60 Hz
Motor with 3 thermistors (PTC)
Material in contact with product: 1.4404 stainless steel (AISI316L)
Maximum liquid temperature: 60°C
High-speed mixer with solid, non-removable agitator shaft.
Maximum shaft length: 1600mm
Agitator shaft balanced for concentricity in the rotational speed range.
1 piece 3-blade mixing propeller Ø=175mm screwed in at the end of the agitator shaft.
Mixing propeller made of a stainless steel casting, mirror finish polished.
Flange dimensions: AØ=200mm/LKØ=165mm(4xØ=11mm)/ZØ=130mm

Protection flange stainless steel:
Flange cover for motor with 10mm stainless steel flange (AISI304)
Stainless steel protective swing flange:
10mm stainless steel flange (mounting flange). Motor on 4 rubber buffers. Therefore suitable for passage operation. (Filling/Draining while the agitator is in operation).
Reduces critical speed ranges during inverter operation.
Protection flange PP:
Motor flange cover with 20mm polypropylene flange.

from 668,00 EUR